FUJITSU M8000 User Manual
Page 25
Intro(8)
Intro
3
setdcl
set a domain component list (DCL)
setdomainmode
set a domain mode
setdomparam
forcibly rewrite OpenBoot™ PROM environment variables
setdscp
set the IP address assignments for the Domain to Service
Processor Communications Protocol (DSCP)
setdualpowerfeed
set dual power feed mode
setemailreport
set up the email report configuration data
sethostname
set a host name and domain name for an XSCF unit
sethttps
start or stop the HTTPS service, which is used in the XSCF
network. This command also performs authentication-
related settings
setldap
configure the Service Processor as a Lightweight Directory
Access Protocol (LDAP) client
setlocale
set the default locale of the XSCF
setlocator
control the blinking of the CHECK LED on the operator
panel
setloginlockout
enable or disable login lockout feature
setlookup
enable or disable the use of the Lightweight Directory
Access Protocol (LDAP) server for authentication and
privilege lookup
setnameserver
set the domain name system (DNS) servers used in the
XSCF network
setnetwork
set or remove the network interface that used in XSCF
setntp
set the NTP servers used in the XSCF network
setpasswordpolicy
manage the system password policy
setpowerupdelay
set the warm-up time of the system and wait time before
system startup
setprivileges
assign user privileges
setroute
set routing information for an XSCF network interface
setshutdowndelay
set the shutdown wait time at power interruption of the
uninterruptible power supply (UPS)
setsmtp
set up the Simple Mail Transfer Protocol (SMTP) settings
setsnmp
manage the SNMP agent