FUJITSU M8000 User Manual
Page 236
setnameserver(8)
214
SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised June 2007
EXTENDED
DESCRIPTION
■
If multiple DNS servers are specified, names are solved in the order specified.
■
To reflect the DNS server name to XSCF, execute the applynetwork(8)
command. After reflected the information, use the rebootxscf(8) command to
reset XSCF to complete the setting.
■
The currently set DNS server can be checked by using the shownameserver(8)
command.
EXAMPLES
EXAMPLE 1
Adds the hosts with the IP addresses 192.168.1.2, 10.18.108.10, and 10.24.1.2
as DNS server. Names are solved in the order specified.
EXAMPLE 2
Deletes the host with the IP address 10.18.108.10 from the DNS server.
EXAMPLE 3
Deletes all the DNS servers.
EXIT STATUS
The following exit values are returned:
SEE ALSO
rebootxscf(8)
, shownameserver(8)
XSCF>
setnameserver 192.168.1.2 10.18.108.10 10.24.1.2
XSCF>
setnameserver -c del 10.18.108.10
XSCF>
setnameserver -c del -a
0
Successful completion.
>0
An error occurred.