FUJITSU M8000 - Manual (Page 343)

showdateoffset(8)
System Administration 321
NAME showdateoffset - display the time differences between the time of the system and
the time of the domains
SYNOPSIS showdateoffset -d domain_id
showdateoffset -a
showdateoffset -h
DESCRIPTION The showdateoffset(8) command displays the time differences between the time
of the system, managed by the XSCF clock, and the time of the domains, which is
managed by each domain clock in second.
If you change the time setting on a domain, for example by using the date(1M)
command, the time of that domain differs from the time of the system. The
difference between revised time of the domain and the time of the system is stored
on the XSCF, and is retained after domain reboot and after XSCF reset.
Execute the showdateoffset(8) command to display the time differences between
the time of the system and the time of all domains. The outputs of the command
will be displayed in second.
Privileges You must have one of the following privileges to run this command:
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
EXAMPLES EXAMPLE 1 On the M3000 server, displays the time differences between the time of the
useradm , platadm, platop, fieldeng
Can run this command for all domains.
domainadm , domainmgr, domainop
Can run this command only for your accessible domains.
-a Displays the time differences between the time of the system and
the time of all accessible domains.
-d domain_id Specifies only one ID of the domain on which the time
differences is displayed. domain_id can be 0–23 depending on the
system configuration.
-h Displays usage statement.