FUJITSU M8000 - Manual (Page 502)

unlockmaintenance(8)
480 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008
EXAMPLE 2 Unlocks the maintenance lock status. Automatically answers "y" to all
prompts.
EXAMPLE 3 Unlocks the maintenance lock status. Suppresses prompts, and automatically
answers "y" to all prompts.
EXIT STATUS The following exit values are returned:
SEE ALSO addfru(8) , deletefru(8), replacefru(8)
XSCF> unlockmaintenance -y
This command unlocks the maintenance lock which prevents the multiple
execution of maintenance commands.
*Never* use this command, except when the lock state remains by some reason.
Careless execution of this command causes serious situation because it
interrupts the running command and XSCF might not be able to recognize the
parts.
Continue? [y|n] :y
XSCF> unlockmaintenance -q -y
XSCF>
0 Successful completion.
>0 An error occurred.