3 power cable connections – FUJITSU PRIMEQUEST 1000 Series C122-E119EN User Manual
Page 52
2.3
Power Cable Connections
This section shows diagrams of the input power distribution for the PRIMEQUEST 1000 series main unit and the
PCI_Box.
-
2.3.1 Power cable connections of the PRIMEQUEST 1800E2/1800E
-
2.3.2 Power cable connections of the PCI_Box
2.3.1
Power cable connections of the PRIMEQUEST 1800E2/1800E
This section shows diagrams of the input power distribution for the PRIMEQUEST 1800E2/1800E.
Standard configuration (primary power feed, no redundant power supply)
Redundant power supply configuration (primary power feed, redundant power supply)
Standard configuration (primary power feed, no redundant power supply)
FIGURE 2.11 Standard configuration (primary power feed, no redundant power supply)
*1 Power cables (AC#0 to AC#1) are connected to PSUs (PSU#0 to PSU#1) on a one-to-one basis.
*2 The power distribution box must be prepared separately.
*3 To use a power distribution box, it must meet the breaker characteristics for the customer's distribution panel.
2.6 Shutoff Characteristic of the Customer's Distribution Panel (Only When Connected to the Power
.)
Redundant power supply configuration (primary power feed, redundant power supply)
PRIMEQUEST 1000 Series Hardware Installation Manual
CHAPTER 2 Connection Information
32
C122-H004-07EN