beautypg.com

2 primequest 1800e installation specifications – FUJITSU PRIMEQUEST 1000 Series C122-E119EN User Manual

Page 27

background image

Item

Description

Maximum

power

consumption/

apparent

power

Operating

Input voltage: 200 V

4.00 kW / 4.21 kVA

Standby

Input voltage: 200 V

95 W / 126 VA

Power factor (*10)

0.95 or more

Rush current [A] (Inrush time) (*11)

20 or less

Leakage current [mA] (*12)

3.5 or less

*1 The dimensions do not include protrusions.

*2 The values are for the device with all options installed.

However, the values do not include the weight of mounted rack-mount rails (7 kg) and cables.

You can use the following formula to calculate the weight of the device based on its configuration:

Equipment weight = 86 + (11 x A) + (8 x B) + (2 x C) [kg]

- A = Number of mounted SBs (1 to 4)

- B = Number of mounted IO Units (1 or 2)

- C = Number of mounted expansion power supply units (0 to 2)

*3 If the intake air temperature is high (but within the normal temperature range), the fan enters high-speed mode

even when operation is normal.

*4 Condensation is not permitted.

*5 The temperature requirements depend on the altitude at the installation site.

- Installation at 0 to 500 m (0 to 1640 ft.) above sea level: 5 to 35°C (41 to 95.0°F)

- Installation at 500 to 1000 m (1640 to 3281 ft.) above sea level: 5 to 34°C (41 to 93.2°F)

- Installation at 1000 to 1500 m (3281 to 4921 ft.) above sea level: 5 to 33°C (41 to 91.4°F)

- Installation at 1500 to 3000 m (4921 to 9843 ft.) above sea level: 5 to 30°C (41 to 86.0°F)

The altitude specifications for the installation site include an allowable margin of error of ±100 m.

*6 "Non-operating" refers to the condition where a device has been disconnected from the power supply and stored.

*7 The actual acoustic noise level depends on the listener's location and the rack mounting conditions.

*8 The noise and acoustic power levels depend on the ambient temperature.

*9 "Non-operating" refers to the installed device in the power-off state.

*10 This is the value during operation.

*11 This value is for a single input cable.

*12 This value is for a single device.

1.3.2

PRIMEQUEST 1800E installation specifications

TABLE 1.3 PRIMEQUEST 1800E installation specifications

Item

Description

External

dimensions

[mm (in.)]

Width

482 (18.98)

Depth (*1)

800 (31.50)

Height

530 (20.87)

PRIMEQUEST 1000 Series Hardware Installation Manual
CHAPTER 1 Installation Information

7

C122-H004-07EN