ATL Telecom AM200 - Manual (Page 74)

ATL User Guide
AM200 Modem 74
The AM200 can be set-up as either a DHCP sever or as a DHCP relay agent. To set-up the AM200 as a
DHCP server select the 'DHCP server' option and then select the 'configure' button.
Figure 41 DHCP Server screen
The DHCP Server Set-up (Figure 42) screen allows the user to set a range of IP addresses that can be assigned
to the DHCP clients on the network. Alternatively the user can select a default range calculated using the IP
address assigned to the AM200.
The Leased Time section allows the user to set a default and maximum time period that the IP address will be
assigned. At the end of the maximum time period the IP address is considered free and can be assigned to
another client.
Figure 42 DHCP Server Set-up screen