ATL Telecom AM200 - Manual (Page 105)

ATL User Guide
AM200 Modem
105
10
10.5.2.4 CHANNELIZATION
This option allows you to specify how many timeslots are to be sent over the dsl line. Two options are
available:
Disabled - Allows full E1 transmission (32 time slots) over the DSL link
EnabledDs0 - Allows fractional E1 transmission. The required individual timeslots must be enabled via the Ds0
User Port screen.
10.5.2.5 TIMESLOTS
Two options are available:
Regenerated - Generates Ds0 zero at the interface rather than transporting it.
Inverted - Modify Ds0 zero for transport over the DSL line.
10.5.2.6 LOOPBACK
Four options are available:
NoLoop - Switches off all loops
PayloadLoop - The received signal at the interface is looped through the device.
LineLoop - The received signal is looped back without going through the device
Inward Loop - The transmitted signal at the interface is looped back and received by the same interface.
Local:LoopConf=
NoLoop
PayloadLoop
RETURN
LineLoop
InwardLoop
Local:Timeslot=
Regenerated
Inverted
RETURN
Local:Channel=
EnabledDs0
Disabled
RETURN