ATL Telecom AM200 - Manual (Page 54)

ATL User Guide
AM200 Modem 54
Unit 2
Type in :-
--> hdlc set interface local adminstatus down ↵↵
--> hdlc set interface local ntimes64k 0 ↵↵
--> ds1 config set interface local adminstatus up ↵↵
--> ds1 config set interface local channelization disabled ↵↵
--> system config save normal ↵↵
8.17.2 V35 Example configuration
To set up a 2048 kbps V35 link starting from the factory default settings.
Unit 1
Mode CO
Line Rate 2048kbps
User Port V35 DCE
Unit 2
Mode CPE
Line Rate RateAdaption
User Port V35 DCE
Unit 1
Type in :-
--> am200 set interface local dslmode co ↵↵
--> am200 set interface local linerate 2048K ↵↵
--> hdlc set interface local adminstatus down ↵↵
--> hdlc set interface local ntimes64k 0 ↵↵
--> nx64 set interface local adminstatus up ↵↵
--> nx64 set interface local type v35 ↵↵
--> nx64 set interface local ntimes64 LineRate ↵↵
--> system config save normal ↵↵