ATL Telecom AM200 - Manual (Page 55)

ATL User Guide
AM200 Modem
55
8
Unit 2
Type in :-
--> hdlc set interface local adminstatus down ↵↵
--> hdlc set interface local ntimes64k 0 ↵↵
--> nx64 set interface local adminstatus up ↵↵
--> nx64 set interface local type v35 ↵↵
--> nx64 set interface local ntimes64 LineRate ↵↵
--> system config save normal ↵↵
8.17.3 V35 & G703 Example configuration
To set up a 1024 kbps V35 link and a G703 1024kbps link starting from the factory default settings. Because
only 16 of the 32 G703 timeslots are to be used only 16 times slots are being set to enable.
Unit 1
Mode CO
Line Rate 2048kbps
N*64 User Port V35 DCE @ 1024k
G703 User Port E1 Framed
Framming E1
G703 Timeslots 16 timeslots activated
Timing Local
Unit 2
Mode CPE
Line Rate RateAdaption
N*64 User Port V35 DCE @ 1024k
G703 User Port E1 Framed
Framming E1
G703 Timeslots 16 timeslots activated
Timing Local