ATL Telecom AM200 - Manual (Page 5)

ATL User Guide
AM200 Modem
5
1 SCOPE 11
2 INTRODUCTION 12
3 EXAMPLE APPLICATIONS 14
3.1 AM200 BACK TO BACK SET-UP (INTEGRATED VOICE & DATA TRANSMISSION) 14
3.2 AM200 TO AM200 CONNECTION VIA AN AM7000 MULTIPLEXER (CROSS CONNECTION) 14
3.3 AM200 MODEMS CONNECTED TO A D.D.N. VIA AN AM7000 MULTIPLEXER AT 1.024Mbps 15
4 CONSTRUCTION 16
4.1 AM200ALE FRONT PANEL 16
4.2 AM200AE FRONT PANEL 16
4.3 AM200 REAR PANEL 17
4.3.1 AC VARIANT 3-PIN IEC MAINS INLET SOCKET AND SWITCH 17
4.3.2 DC VARIANT 17
4.3.3 REAR CONNECTORS COMMON TO AC & DC VARIANTS 18
5 INSTALLATION 19
5.1 CONNECTION OF PROTECTIVE EARTH 19
5.2 LED POWER ON SEQUENCE 19
5.3 LCD POWER ON SEQUENCE 19
5.4 DEFAULT SETTINGS 19
6 QUICK START GUIDE 21
6.1 SET ONE END TO CO 21
6.2 LINE RATE 21
6.3 ETHERNET 22
6.3.1 CONFIGURATION AS A BRIDGE 22
6.3.2 CHANGING AN AM200 FROM ROUTER TO BRIDGE 23
6.3.3 C0NFIGURATION AS A ROUTER 24
6.4 G703 26
6.5 Nx64 27
7 SELECTING THE CIRCUIT CONFIGURATION 28
7.1 STANDALONE SECTION 28
7.1.1 INTERNAL TIMING 29
7.1.1.1 G.703 to G.703 Internal Timing Master 29
7.1.1.2 G.703 to X.21/V.35 Internal Timing 29
7.1.1.3 X.21/V.35 DCE to X.21/V.35 DCE 30
7.1.2 G.703 TO G.703 TRANSPARENT TIMING 30
7.2 TANDEM SECTION - EXTERNAL TIMING 31
7.2.1 G.703 TO G.703 EXTERNAL TIMING 31
7.2.2 X.21/V.35 DTE-TO X.21/V.35 DCE 32
7.2.3 G.703-TO X.21/V.35 DCE 32
7.3 CROSSING AN SDH NETWORK 33