Setting the default incoming destination, Defining the service provider destination, Outgoing routing – IPitomy IP1000 User Guide User Manual
Page 97

destination for all calls.
Setting the Default Incoming Destination
To set the Default Incoming Destination:
1. Click
on
Call Routing and Incoming. The Incoming Call Routing page
will appear.
2. Select
a
Default Incoming Destination from the drop-down box.
3. Click
the
Set button.
4. Click
the
Save Changes button.
Defining the Service Provider Destination
A service provider destination can also be defined. The service provider destination acts
as the default incoming destination for a particular provider. To set the service provider
destination:
1. Select
an
Incoming Destination from the drop-down box.
2. Click
on
Save Changes button.
3. Click
on
Apply Changes when ready to implement these changes to the
system.
Outgoing Routing
Outgoing routing tells the system what service providers certain types of calls should use.
The IPitomy 1000 comes with common outgoing call routes already provisioned in the
system:
7 digit dialing
Copyright
© IPitomy Communication, LLC
92
0007VRF