IPitomy IP1000 User Guide - Manual (Page 72)

4. Enter the telephone number.
Changing a Forwarding Number While Away from an Extension
Only unconditional forwarding can be changed from a touch-tone keypad.
When it is necessary to modify the forwarding setting while away from the office,
the IPitomy 1000 has a forwarding application built into the system. It is
necessary to have an automated attendant menu accessible from outside the
system. The forwarding gateway is selectable as an option from the menu. When
away from the office, it is possible to call into the automated attendant, enter the
digit setup to be the forwarding gateway. Here users can turn forwarding “on” or
“off” and enter a different number to forward calls to.
1. Call into the Automated Attendant (menu).
2. Select the touch-tone digit that has been set for modifying forwarding
settings.
3. The system will prompt for an Extension Number and Password.
4. The system will indicate if extension forwarding is Enabled or Disabled.
5. Pressing “1” toggles between Enabled and Disabled.
6. Pressing “2” allows the forwarding destination to be modified.
Advanced Settings
Network Settings
Network settings automatically register in the extension through the system.
These settings represent registration and identification information. The system
(extension) defaults should not be changed without advanced knowledge of the
behaviors of the particular settings.
Copyright
© IPitomy Communication, LLC 67 0007VRF