Configuring office 2 – IPitomy IP1000 User Guide User Manual
Page 95

8. Leave qualify at 30000.
9. Click
Save Changes
10. Click Apply Changes
Configuring Office 2
1. Click
on
Destinations and Branch Offices. The Branch Offices page
will appear.
2. Click
on
Add Office.
3. Name should match that given to the Office 1 PBX. The name should
only contain alpha-numeric characters and no spaces.
4. Host needs to be the external IP address or domain corresponding to the
IP of the main office PBX.
5. Create a unique dialing prefix for the extensions connected to the Office
2 PBX.
6. Password needs to be the same as the one assigned in the Office 1
PBX.
7. Select Yes for register.
8. Leave qualify at 30000.
9. Click Save Changes
10. Click Apply Changes
To setup up multiple PBX’s just follow the above pattern linking each PBX to each other
and use a unique dialing prefix for each one.
To place a call from one Branch Office to another just dial the prefix that was assigned to
that locations PBX + the extension of the user trying to be reached at the other office.
This same easy concept works for transferring calls from one Branch Office to another.
Branch Extensions
Copyright
© IPitomy Communication, LLC
90
0007VRF