Local network, Dhcp server, Dhcp client table – IPitomy IP1000 User Guide User Manual

Page 44

MTU – Show the MTU (Maximum Transmission Unit) setting for the IP1000.

IP Release – It is available for a DHCP connection, click this button to release the

current IP address got from DHCP server.

IP Renew – It is available for a DHCP connection, click this button to release the

current IP address and get a new IP address from DHCP server.

Local Network

The local Network screen displays the information about the local network.

Local Network
Local MAC Address – The MAC Address of the IP1000 for local interface.

Router IP Address – This shows the IP address used by IP1000 for appearing on

local network.

Subnet Mask – The IP1000’s Subnet Mask is shown here.

DHCP Server
DHCP Server – Display the status of the IP1000 embedded DHCP server.

Start IP Address – The starting IP address of the range of IP addresses are used by

DHCP server for being assigned to devices on local network.

End IP Address –The ending IP address of the range of IP addresses are used by

DHCP server for being assigned to devices on local network.

DHCP Client Table

Click the DHCP Clients Table button to view the DHCP Client Table. It lists computers
and other devices that have been assigned IP addresses by the IP1000 embedded
DHCP server. Sorting by Client Name, Interface, IP Address, MAC Address or Expired
Time (how much time is left for the current IP address) is supported. To remove a DHCP
client, select it and click the Delete button. To retrieve the most up-to-date information,
click the Refresh button. To exit this screen and return to the Local Network screen, click
the Close button.

0007VRF