To program a key’s state, Advanced settings – IPitomy IP1000 User Guide User Manual
Page 67
Incoming
A call is ringing the extension.
Outgoing
A call is being placed from the extension.
To program a key’s state:
Check the desired boxes (any of: Idle, Connected, Incoming, Outgoing). If no
boxes are available for checking it means that the key will always be active.
Advanced Settings
Custom Sip Settings
Network *LAN
*WAN
*Custom
Server
The IP address or name of the server to
use for the Network type selected. A user
must use the Custom Network type to set
a user defined Server.
Time Settings
Network *PBX
*Custom
Time Server
The IP address or name of the server to
obtain time information from. A user must
use the Custom Network type to set a
user defined Time Server.
Time Zone
*US-Eastern
*US-Central
*US-Mountain
Copyright
© IPitomy Communication, LLC
62
0007VRF