Csv upload, Add range – IPitomy IP1000 User Guide User Manual
Page 63

the “Create” button. This takes you to the Extension Creation page.
3. Enter the new extension information or upload a CSV file for the
extensions. Then Click the “Create” button. If successful, Click th
“Return to Extensions” button.
4. Click the “Auto-Discovery” butto
e
n.
to setup are highlighted. Click the
ult”. Wait long enough for the phones to default
es from step 2. Click the “Assign,
CSV Upload
rd consisting of 1-5 comma separated fields. The order of the fields
ail, Number, Phone Type, MAC
ber.
led out in English. Example Aastra 480i
Yo
‘#’ marks. Comments must either be
Add Range
5. All of the phones you are attempting
checkboxes next to these phones (verifying that you are only checking
the ones from step 2.).
6. Click the “Factory Defa
and restart. This could be anywhere from 30 seconds to 2 minutes for
each phone, depending on the model.
7. Click
the
checkboxes next to the phon
Configure, and Restart” button.
Each line is a reco
must be:
Name, Em
o
Number: the extension num
o
Phone Type: This should be spel
u may omit fields starting from the right hand side of a record but the order of the
remaining fields must match the file format above.
Comments may be placed in the CSV file by using
at the start of a line or have only spaces in front of the mark. Comments must not be
placed on the same line as a record entry.
1. Go
to
Destinations > Extensions.
created in the provided text box.
nsion#.
2. Enter the number of extensions to be
3. Click
the
Add Range button.
4. Give the system a starting exte
Copyright
© IPitomy Communication, LLC
58
0007VRF