HP LXR 8000 User Manual

Page 94

Install the HP Model 30/FC High Availability Disk Array Software

The HP Model 30/FC High Availability Disk Array software consists of the following host-resident utility:

•

ArrayGUIde

ArrayGUIde is a software tool for managing HP Model 30/FC High Availability Disk Arrays connected to HP
NetServers. ArrayGUIde consists of a graphical user interface (GUI), called Arraymgr, and a storage system agent,
called Agent.

–

Arraymgr is used to configure disk arrays and monitor their status from any host on a TCP/IP network.

–

Agent runs in the background on an HP NetServer.

Install this software utility by following the detailed instructions included in the NT Addendum, Hewlett-Packard Model
30/FC High Availability Disk Array User’s Guide and Service Manual Addendum for Microsoft Windows NT 4.0
(part number A3661-90019). The disk array should be powered up while this utility is installed.

To install ArrayGUIde, see the Installing ArrayGUIde section of chapter 8 of the NT Addendum.

This manual is related to the following products:

A3661B