HP LXR 8000 - Manual (Page 75)

19
b. Remove the battery backup unit (BBU) from the back of the disk array.
– Locate the BBU. It is above the power supply units.
– Grasp the BBU by inserting your thumbs in the holes and your forefingers into the latches.
– Slide the latches inward and hold.
– Pull the BBU out of the chassis.
Figure 13. Location of the BBU
CAUTION Use caution when removing the BBU. It is very heavy.
Figure 14. Removing the BBU
Back of storage system
BBU
SP B SP A
BBU