HP KAYAK XM600 - Manual (Page 17)

1 Setting Up and Using Your PC Workstation
Viewing the HP Summary Screen
17
Viewing the HP Summary Screen
The HP Summary Screen gives you a summary of the current configuration
of your PC Workstation (for example: BIOS version, CPU speed, memory
module size, and installed mass storage devices).
It is recommended that you check the configuration of your PC Workstation
when you first use it and each time after you install, remove, or upgrade
accessories. To check the configuration:
1 Turn on the display and then the PC Workstation. If the PC Workstation
is already turned on, save your data and exit all programs, then restart
the PC Workstation. Consult your operating system documentation for
any special instructions concerning turning off and restarting your PC
Workstation.
2 When the start-up logo appears on your display, press Esc . This takes
you to the HP Summary Screen. (To go immediately into the Setup
program, and bypass the Summary Screen, press
F2 instead of Esc ).
The Summary Screen is displayed for only a short time.