HP KAYAK XM600 - Manual (Page 10)

10
Technical Information
Physical characteristics (standard configuration as shipped)
NOTE When the computer is turned off with the power button on the front panel, the
power consumption falls below 5 Watts, but is not zero. The special on/off method
used by these computers considerably extends the lifetime of the power supply. To
reach zero power consumption in “off” mode, either unplug the power outlet or use
a power block with a switch.
Characteristics: Description:
Weight (excl. keyboard and display) 14.4 kilograms (31.68 pounds).
Dimensions 47.0 cm max. (D) by 21,0 cm (W) by 49.0 cm (H)
(18.50 inches by 8.26 inches by 19.29 inches).
Footprint 0.09 m
2
(1.06 sq ft).
Storage temperature -40 °C to 70°C (-40 °F to 158 °F).
Storage humidity 8% to 85% (relative).
Operating temperature 10 °C to 35 °C (50 °F to 95 °F).
Operating humidity 15% to 85% (relative).
Acoustic noise emission (ISO 7779):
• Operating (typical
LWa< 42 dBa
For more information on acoustic data, refer to the PC work-
station’s data sheet on HP’s website at:
http://www.hp.com/desktops/kayak
Power supply • Input voltage: 100 - 127, 200 - 250 V (switch select)
• Input frequency: 50/60 Hz
• Maximum output power: 320 W continuous
• The maximum supported power consumption per PCI
accessory slot is 25 W, either from the 5 V or the 3.3 V
supply and must respect the electrical specification of
the PCI 2.2 specification. Total power consumption for
the PCI slots must not exceed 75 W.
• The maximum power consumption tolerated in the AGP
PRO slot is limited to 50 W.