Connect a digital camera – HP 3200 User Manual
Page 65
The slots are configured as follows:
●
Top left slot: CompactFlash (I, II)
●
Top right slot: Secure Digital, MultiMediaCard (MMC), Secure MultiMedia Card
●
Bottom left slot: xD-Picture Card
●
Bottom right slot: Memory Stick, Magic Gate Memory Stick, Memory Stick Duo
(with user-supplied adapter), Memory Stick Pro
To insert a memory card
1.
Turn the memory card so that the label faces left, and the contacts are facing
your HP All-in-One.
2.
Insert the memory card into the corresponding memory card slot.
Connect a digital camera
The HP All-in-One supports the PictBridge mode, which enables you to connect any
camera in PictBridge mode to the front USB port and print photos contained on the
memory card in the camera. See the documentation that came with your camera to
find out if it supports PictBridge.
The front USB port is located underneath the memory card slots:
If your camera is not in PictBridge mode or does not support PictBridge, you can still
access photos in the camera by using the camera in storage device mode. For more
information, see
1.
Connect your camera to the front USB port on your HP All-in-One using the USB
cable supplied with your camera.
2.
Turn on your camera and make sure it is in PictBridge mode.
Note
Check your camera documentation to verify how to change the
USB mode to PictBridge. Different cameras use different terms to
describe PictBridge mode. For instance, some cameras have a digital
Chapter 6
62
HP Photosmart 3200 All-in-One series
Photos
and
videos