HP 3200 - Manual (Page 54)

Load an oversized original
You can copy or scan oversized originals by completely removing the lid from your
HP All-in-One. Your HP All-in-One functions normally with the lid removed.
Tip When you copy oversized originals, place the lid over the original. This
improves the quality of the copy and reduces ink use.
To remove the lid
1.
If necessary, unplug the Slide and Negative light power cord and remove it from
the cord clips on the back of the HP All-in-One.
2. Lift the lid to the open position, grasp the sides of the lid, and then gently pull the
lid upward until it stops.
3. Press the hinge releases until the lid separates from the rest of the HP All-in-One.
User Guide 51
Load
originals
and load paper