HP 3200 - Manual (Page 51)

To load 35 mm negatives
1.
Raise the lid and remove the Slide and Negative Film holder and the lid backing.
Set the lid backing aside where it will not get damaged or dirty.
2. Unfold the holder so that the negative film portion is on top and the film opening is
on the right side.
3. Slide the negative film into the center of the holder so that the front of the image
faces away from you and appears backward.
4. Place the holder on the glass and match the bottom edge with the bottom edge of
the glass. Then, match the right tab on the top half of the holder with the right
edge of the glass.
For information on scanning slides and negative film, see Scan slides or negative film .
Chapter 5
48 HP Photosmart 3200 All-in-One series
Load
originals
and
load
paper