HP Officejet 6500A Plus - Manual (Page 22)

To order HP papers and other supplies, go to www.hp.com/buy/supplies. If prompted,
select your country/region, follow the prompts to select your printer, and then click one
of the shopping links on the page.
NOTE: At this time, some portions of the HP Web site are available in English
only.
Tips for selecting and using media
For the best results, observe the following guidelines.
•
Always use media that conforms to the printer specifications. For more information,
see Media specifications.
• Load only one type of media at a time into a tray or automatic document feeder
(ADF).
• When loading the trays and ADF, make sure the media is loaded correctly. For
more information, see Load media or Load an original in the automatic document
feeder (ADF).
• Do not overload the tray or ADF. For more information, see Media specifications.
• To prevent jams, poor print quality, and other printing problems, avoid loading the
following media in the trays or ADF:
◦
Multipart forms
◦ Media that is damaged, curled, or wrinkled
◦ Media with cutouts or perforations
◦ Media that is heavily textured, embossed, or does not accept ink well
◦ Media that is too lightweight or stretches easily
◦ Media that contains staples or clips
NOTE: To scan, copy, or fax documents that contain pages that do not
conform to these guidelines, use the scanner glass. For more information, see
Load an original on the scanner glass.
Load an original on the scanner glass
You can copy, scan, or fax up to Letter- or A4-size originals by loading them on the
glass.
NOTE: Many of the special features do not work correctly if the glass and lid
backing are not clean. For more information, see Maintain the printer.
To load an original on the scanner glass
Use these steps to load an original on the scanner glass.
1. Lift the scanner lid.
2. Load your original print-side down.
TIP: For more help on loading an original, refer to the engraved guides along
the edge of the glass.
Chapter 1
18 Get started