HP 3500YL - Manual (Page 39)

Multimedia Traffic Control with IP Multicast (IGMP)
CLI: Configuring and Displaying IGMP
CLI: Configuring and Displaying IGMP
IGMP Commands Used in This Section
show ip igmp configuration page 2-7
ip igmp page 2-9
high-priority-forward page 2-11
auto <[ethernet] page 2-10
blocked <[ethernet] page 2-10
forward <[ethernet] > page 2-10
querier page 2-11
show ip igmp Refer to the section titled “Internet Group
Management Protocol (IGMP) Status” in appendix B
of the Management and Configuration Guide for your
switch.
Viewing the Current IGMP Configuration. This command lists the IGMP
configuration for all VLANs configured on the switch or for a specific VLAN.
Syntax: show ip igmp config
Displays IGMP configuration for all VLANs on the switch.
show ip igmp vlan < vid > config
Displays IGMP configuration for a specific VLAN on the
switch, including per-port data.
(For IGMP operating status, refer to the section titled “Internet Group Man­
agement Protocol (IGMP) Status” in appendix B, “Monitoring and Analyzing
Switch Operation” of the Management and Configuration Guide for you
switch.)
2-7