HP 3500YL User Manual
Hp procurve switch software
Table of contents
Document Outline
- HP ProCurve Multicast and Routing Guide
- Front Cover
- Title Page
- Copyright, Notices, & Publication Data
- Contents
- Feature Index
- 1.Getting Started
- 2.Multimedia Traffic Control with IP Multicast (IGMP)
- 3.PIM-DM (Dense Mode)
- 4.PIM-SM (Sparse Mode)
- Contents
- Introduction
- Feature Overview
- Terminology
- PIM-SM Operation and Router Types
- Operating Rules and Recommendations
- Configuration Steps for PIM-SM
- Configuring PIM-SM on the Router
- Global Configuration Context for Supporting PIM-SM
- VLAN Context Commands for Configuring PIM-SM
- Router PIM Context Commands for Configuring PIM- SM Operation
- Changing the Shortest-Path Tree (SPT) Operation
- Statically Configuring an RP To Accept Multicast Traffic
- Example of Configuring PIM-SM Support in the Router PIM Context
- Displaying PIM-SM Data and Configuration Settings
- Operating Notes
- Event Log Messages
- 5.IP Routing Features
- Contents
- Overview of IP Routing
- Configuring IP Parameters for Routing Switches
- Configuring Static IP Routes
- Configuring RIP
- Configuring OSPF
- Terminology
- Overview of OSPF
- OSPF Router Types
- OSPF Area Types
- OSPF RFC Compliance
- Reducing AS External LSAs and Type-3 Summary LSAs
- Equal Cost Multi-Path Routing
- Dynamic OSPF Activation and Configuration
- General Configuration Steps for OSPF
- Configuring OSPF on the Routing Switch
- 12. Optional: Configuring OSPF Interface Authentication
- 13. Configuring an ABR To Use a Virtual Link to the Backbone
- OSPF Passive
- Displaying OSPF Information
- OSPF Equal-Cost Multipath (ECMP) for Different Subnets Available Through the Same Next-Hop Routes
- Configuring IRDP
- Configuring DHCP Relay
- UDP Broadcast Forwarding
- 6.Virtual Router Redundancy Protocol (VRRP)
- Index
- Notices & Publication Data