HP 3500YL - Manual (Page 287)

IP Routing Features
Configuring OSPF
Displaying OSPF Redistribution Information
As described under “2. Enable Route Redistribution” on page 5-74, you can
configure the routing switch to redistribute connected, static, and RIP routes
into OSPF. When you redistribute a route into OSPF, the routing switch can
use OSPF to advertise the route to its OSPF neighbors.
To display the status of the OSPF redistribution, enter show ip ospf redistribute
at any CLI context level:
ProCurve# show ip ospf redistribute
OSPF redistributing
Route type Status
---------- --------
connected enabled
static enabled
rip enabled
Figure 5-48. Example of Output for Show IP OSPF Redistribute
The display shows whether redistribution of each of the route types,
connected, static, and RIP is enabled.
Displaying OSPF Redistribution Filter (restrict) Information
As described under “7. Optional: Configure for External Route Redistribution
in an OSPF Domain” on page 5-73, you can configure the redistribution filters
on the routing switch to restrict route redistribution by OSPF.
To display the status of the OSPF redistribution filters, enter show ip ospf
restrict at any CLI context level.
ProCurve# show ip ospf restrict
OSPF restrict list
IP Address Mask
--------------- ---------------
10.0.8.0 255.255.248.0
15.0.0.0 255.0.0.0
Figure 5-49. Example of Output for Show IP OSPF Restrict
5-113