HP PROLIANT ML330 G6 - Manual (Page 71)

Hardware options installation 71
5. Install the dedicated iLO 2 management port module.
6. Using a T-15 Torx screwdriver, secure the dedicated iLO 2 management port module.
7. Install the access panel.
8. Do one of the following:
o Close or install the tower bezel, as needed.
o Slide the server back into the rack.
9. Connect a network cable to the module, as needed.
10. Power up the server (on page 20 ).
HP Trusted Platform Module option
Use these instructions to install and enable a TPM on a supported server. This procedure includes three
sections:
1. Installing the Trusted Platform Module board (on page 72 ).