HP PROLIANT ML330 G6 - Manual (Page 52)

Hardware options installation 52
3. Install the hard drive.
4. Determine the status of the drive by observing the drive LEDs (" Hot-plug SATA or SAS hard drive
LEDs " on page 18 ).
5. Resume normal server operations.
Expansion hard drive cage option (hot-plug)
To install the component:
1. Power down the server (on page 20 ).
2. Do one of the following:
o Open or remove the tower bezel, as needed (" Open or remove the tower bezel " on page 20 ).
o Extend the server from the rack (on page 21 ).
3. Remove the access panel (on page 21 ).
4. Remove the air baffle (on page 22 ).