HP PROLIANT ML330 G6 - Manual (Page 69)

Hardware options installation 69
7. Connect the cable to the cache module.
8. Install the battery pack.
9. Route the cable.
10. Install the access panel (on page 22 ).
11. Do one of the following:
o Close or install the tower bezel, as needed.
o Slide the server back into the rack.
12. Power up the server (on page 20 ).
SAS controller option
To install the component:
1. Power down the server (on page 20 ).
2. Do one of the following:
o Open or remove the tower bezel, as needed (" Open or remove the tower bezel " on page 20 ).