HP PROLIANT ML330 G6 - Manual (Page 24)

Operations 24
CAUTION: Always populate each media bay with either a device or a blank. Proper airflow
can only be maintained when the bays are populated. Unpopulated drive bays can lead to
improper cooling and thermal damage.
3. Remove the media bay blank.
Remove a bezel blank
1. Power down the server (on page 20 ).
2. Remove the front bezel (" Open or remove the tower bezel " on page 20 ).
3. Remove a bezel blank.
Remove the processor board
1. Power down the server (on page 20 ).
2. Do one of the following:
o Open or remove the tower bezel, as needed (" Open or remove the tower bezel " on page 20 ).
o Extend the server from the rack (on page 21 ).
3. Remove the access panel (on page 21 ).