Epson Action Laser - Manual (Page 91)

Paper Feed Methods
10. If you want face-up delivery, set the paper path selector to the
down position.
11. If the paper you have just loaded is a different size than the
paper you last used, set the SelecType option for the new paper
size, as described in Chapter 3.
12. Press the
ON LINE
button to set the printer on line.
Now your laser printer is ready to print.
Feeding paper manually
If you want to print on mailing labels,
heavy
paper (over 27 lb. or
101 g/m 2 ), light-weight paper (14 through 16 lb. or 52 through
60
g/m 2 ),
envelopes, or transparencies, or if you are printing a small
job on a different type of paper than is already in the cassette, you
can hand-feed
the
paper using the manual feed tray.
You can manually feed paper ranging in size from 3.2 x 5.0 inches
(82 x 127 mm) to 8.5 x 14.0 inches (216 x 356 mm).
Note: For best results, it may be necessary to change the amount
of paper in the paper cassette; it is recommended that you leave
the cassette half-filled (half-way to the red line) during manual
printing.
It is easy to hand-feed paper with the laser printer; just follow
the
steps listed below.
1. If the paper size you are printing on is different than the paper
size you just used, use SelecType to select the
new
paper size as
described in Chapter 3. (If you are using a non-standard paper
size
that is not listed in
SelecType, skip this step.)
Paper Handling 4-11