Epson Action Laser - Manual (Page 69)

Using SelecType
4. Press the
SET
button again to set the emulation.
5. Press the
SET
button a third time to enter the emulation
submenu, where you can change these options:
FONT SOURCE
FONT NUMBER
FORM
SYMBOL
6. Use the or button to select a function to
change.
Note: This submenu does not work in a loop. Pressing
the
button when the first item is displayed or the button when
the
last item is displayed causes you to exit the emulation
submenu and return to the main menu.
7. Press the
SET
button to activate the option. The function stops
blinking, and
the
option starts blinking.
8. Use the or button to move to
the
option you
want
to set.
9. Press the
SET
button. An asterisk (*) appears next to the option,
indicating that the new option has been set. The option stops
blinking; the function starts blinking.
10. To exit the emulation submenu and return to
the
main menu,
use the or button to take you back to the main menu. The
message EMULATION = HPLJ2*
appears.
If you wish to exit SelecType at this point, see
the
section on
exiting SelecType later in this chapter.
Using the Printer 3-15