Epson Action Laser - Manual (Page 156)

Unpacking the Printer after Shipment
1. Unpack the printer as described in Chapter 1. When you unpack
the developer unit and drum unit, wipe off any excess toner that
is on these units.
CAUTIONS:
l
Do not wipe or vacuum toner off the roller on the
developer unit. Avoid touching this roller.
l
Be careful not to scratch or mar the green drum. Also,
do not touch the drum with your fingers, since oils
from your skin can permanently mar its surface and
affect print quality.
2.
3.
4.
Before reassembling the printer, perform the routine cleaning
procedures described beginning on page 6-19. (Skip the step on
readying your printer for printing.)
Assemble the printer as described in Chapter 1.
Follow the instructions on setting the paper feed mechanism in
Chapter 1, page 1-23. This procedure causes the paper feed
mechanism, which can become misaligned during shipping, to
resume its original position.
6-40 Maintenance and Transportation