Epson Action Laser - Manual (Page 139)

Routine Printer Cleaning
Cleaning the laser beam lens
Note: Cleaning the lens is required at an interval of 10,000 pages
(the same interval as for changing the drum). If you wish, you can
clean the lens when you change the drum and skip this procedure
when you change the toner cartridge. If you plan to skip this
procedure, go to step 3 for printer reassembly information.
Follow these steps to clean the laser beam lens:
1. Locate the lens, which is the clear plastic component inside the
top cover of your printer. Clean the lens with a lens cleaning
cloth or other clean, soft cloth.
CAUTION: Do not use alcohol to clean the lens.
2. To ready your printer for printing, reinstall your basket. (Press
down simultaneously on the drum unit’s two green handles
until the drum unit clicks into place.) Then close the printer
cover. Plug in the power cord and turn your printer back on.
Maintenance and Transportation
6-23