Epson Action Laser - Manual (Page 73)

Using SelecType
SelecType practice example
To better understand how to use SelecType, you
may want to try
this example.
Turning off the buzzer
This example
shows how
to turn off the buzzer.
1.
2.
3.
4.
5.
BUZZER = OFF*
Press the SelecType button to enter SelecType. This message
appears:
P A P E R S I Z E = L T R *
Press the button nine times or simply press the button
once,
until
the
BUZZER = ON* appears in the display. The word
BUZZER is blinking.
Press the
SET
button to move to
the
list of buzzer options. The
word ON starts blinking.
Press the button to move to the
OFF
option.
BUZZER = OFF
Press the
SET
button to set the option. The asterisk (*)
now
appears
next
to the word OFF. The word BUZZER starts blinking
again.
Now exit SelecType by pressing the SelecType button. Then hold
down the
CONTINUE/RESET
button for three seconds until
RESET
appears in the display.
Using the Printer 3-19