Epson Action Laser - Manual (Page 120)

Maintenance Messages
1. Prepare a clean flat surface to set the basket on. To catch excess
toner that may remain in the used toner cartridge, it is
recommended that you spread some paper on the surface.
2. Raise the top cover of your printer by lifting up on the latch.
WARNINGS:
•
Opening the printer exposes the fusing unit, the
orange area marked with a caution label. This unit is
very hot, so be careful not to touch it.
l
This procedure exposes the green drum. Because the
drum is light-sensitive, it should not be exposed to
room light for any longer than necessary (a few
minutes at most). Thus, it is recommended that you
cover the drum unit with a soft cloth or sheet of paper
whenever the drum is exposed.
3. Remove the basket from the printer and place it on the paper.
6-4 Maintenance and Transportation