Epson Action Laser - Manual (Page 68)

Using SelecType
Set an option
When you reach the option you wish to use, press the
SET
button.
An asterisk (*) appears next to the option, indicating that it
has
been
set. The option stops blinking and the function starts blinking. To
implement your SelecType
changes,
see
the
section on exiting
SelecType later in this chapter.
If you want to return to
the
menu functions without setting a new
option, make sure the current option
(the one with the
asterisk)
appears in the display. (If necessary, use the arrows to move to the
current option.) Press the
SET
button. The option stops blinking and
the menu function begins blinking. You can
now move to a new
function.
Display submenu functions and select options
When you want to enter the emulation or interface submenus
from
the SelecType main menu, follow the steps described below.
Note: Options for each function are described in
the
SelecType
Options section later in
this
chapter.
HP emulation submenu
To enter the emulation submenu, follow the steps described below:
1. Press
the or
button
until you see
the
EMULATION
function
in the display.
2. Press the
SET
button to
switch
to the current option.
3. If
necessary,
use the or button to select
the HPL J2
option.
EMULATION = HPLJ2*
3-14 Using the Printer