Hestan 48 Inch Freestanding Dual Fuel Range Use and Care Manual - Manual (Page 45)

© 2019 Hestan Commercial Corporation
43
EN
OVEN CONTROLS
(CONTINUED)
1. Turn BOTH the Mode Select and
Temperature knob to the SELF CLEAN
setting. The display will show “SELF
CLEAN” to indicate this setting.
2. Select the desired level of cleaning:
Speed Clean, Medium Clean, or Heavy
Clean.
See table for times.
3. Once selected, the display will show “SELF
CLEAN” and the selected cleaning level
(SPD, MED, or HVY). The door will latch
and the lock icon and the time remaining
are displayed. The oven cavity will reach a
temperature of approx. 825°F [440°C].
4. Once self clean has completed, an audible
alert will sound, the timer will show 00:00
and “COOLING” will be displayed. The
oven is now in cool-down mode. See table
for times.
5. Once the oven cavity has reached a safe
temperature (550°F / 288°C) the door will un-
latch, the lock icon will go out, and the display
prompts the user to return both oven knobs to
the OFF position.
CAUTION: The oven has not cooled-down
completely!
The oven could now be used again. However, you
must wait for the oven to cool completely to room
temperature before wiping down the interior.
NOTE:
a. If a power failure occurs while the door is
locked, it will remain locked until power is
restored and the oven temperature cools to a
safe level.
LEVEL
HIGH-TEMP
CLEANING
SPEED-CLEAN 2:30 :40 3:10
MEDIUM 3:00 :40 3:40
HEAVY
3:30 :40 4:10
TIME TO DOOR
UN-LATCH
(550°F / 290°C)
TOTAL
TIME
SELF-CLEANING TIMES
SELF-CLEAN MODE
Heavy food debris should be removed
before running the self-clean cycle. Remove all oven racks,
ladder racks, broiler pans, utensils, temperature probes,
etc. from the oven before self-clean. The interior lights are
disabled during this cycle.
Self-clean is not available for companion oven of 48” range.
See the CARE & MAINTENANCE section of this manual for
more details.
NOTICE