Leaving the setup program, Exit, Change settings – Epson LT-286 User Manual
Page 47: Exit without saving, Enter
Leaving the Setup Program
When you finish using the setup program, press until
Exit
is
highlighted and then press
Enter.
The screen displays a list of the
current setup program settings and a menu:
4.00
(c)
1988
640 KB
0 K N
80 col
80287
A(internal): 1.44
B(external): None
2(20MB)
3.0
aelect
F
1
Check the list to make sure all the information is correct:
l
If any setting is incorrect, highlight
Change settings
and
press
Enter.
The main setup menu appears again and you can
correct the setting.
l
If you did not make any changes or if you want to cancel the
changes you made, highlight
Exit without saving
and
then press
Enter.
The Reference diskette’s operation menu
appears. Press 0 and then
Enter
to exit to MS-DOS. Then
remove your Reference diskette and insert your working copy of
the Startup/Operating 1 diskette.
Running the Setup Program
2-13