Epson LT-286 - Manual (Page 184)

Partitioning hard disk, 3-2-6
Performing system diagnostics, D-1 -31
Plugging in power cord, 1-3
Port. See Interface
Power,
cord, 1-3
LED, 1-17, 4-3
requirements, 1-3, E-3
supply, E-2
switch, 1-16
turning off, 4-21
turning on, 1-15 -17
Power cord, connecting, 1-3
Power-on diagnostics, 1-17, C-1 -4
Preparing hard disk, 3-1-12
Primary partition, 3-2 -5, 3-7 -9
Printer,
cable, 1-4 -7
connecting, 1-4 -7
connector, 1-5, 1-7
diagnostics check, D-21 -23, D-24 -25, D-27 -28
parallel, 1-4 -6, D-21 -22, D-27 -28
serial, 1-7, 1-12-13, D-22 -23
Printing graphic characters, D-24 -25
Protecting data, 4-17
R
RAM (Random access memory), 1-17, C-2, D-6
Read-only memory (ROM), D-6
Read/write heads, C-4, D-17 -20, D-25 -27
Removing diskette, 4-14
Resetting computer, 4-20-21
RS-232C serial port, See Serial
Running setup program, 2-1 -14
Running system diagnostics, D-1 -31
S
Safety rules, 1-15
Screen. See LCD screen
Self test, internal, 1-17, C-14
8 Index