Coprocessor – Epson LT-286 User Manual
Page 40
l
Special options-Ch
oose this setting if you have an
EGA (Enhanced Graphics Adapter) or VGA (Video Graphics
Array) display adapter in an expansion chassis and you want
the computer’s initial display to appear on the monitor
connected to that adapter.
To select a display option, highlight the option and press
Enter.
Then highlight
SAVE SETTINGS
and press
Enter
again. The main
setup menu reappears.
Coprocessor
The setup program assumes that you have not installed an 80287
math coprocessor. If this is the case, you do not need to make any
changes to the
Coprocessor
portion of the setup program.
If you have installed an 80287 coprocessor, highlight
Coprocessor
and press
Enter.
The following display appears:
Exit
Memory
Display
Coprocessor
Mass storage
Backlight period
Gray scale
*** SAVE SETTINGS ***
Highlight the
80287
option and press
Enter
once, to indicate
that you have installed an 80287 coprocessor. Then highlight
SAVE SETTINGS and
press
Enter.
2-6
Running the Setup Program