Modifying the device list – Epson LT-286 User Manual

Page 127

The screen looks something like this:

DEVICE LIST

1 -

2 -
3 -
5 -

6 -

9 -

11 -

14 -
17 -

System board

Memory

Keyboard

Color graphics adapter and CRT

Floppy disk drives and controller

Parallel port (printer interface)

Serial port

(RS-232C

port)

Dot-matrix printer

Hard disk drives and controller

Is the DEVICE LIST correct (Y/N)?

4. If the list correctly describes your system, press Y and

Enter.

a device is missing from the list, or if you wish to change the

list, press

and

Enter.

If DIP switch I on the rear panel of the computer is set in

the off position, the DEVICE LIST includes item 14, dot-

matrix printer, whether or not a printer is physically
connected to the system. This is normal. To perform the dot-

matrix printer test, however, you must have a dot-matrix
printer attached.

Modifying the DEVICE LIST

If an installed device is missing from the DEVICE LIST, it is

important that you add it to the list and test it carefully. You see

this prompt:

Is the DEVICE LIST correct (Y/N)?

D-2

Performing System Diagnostics