Epson LT-286 - Manual (Page 36)

Starting the Setup Program
To start the setup program, follow these steps:
1. Insert your working copy of the Reference diskette in drive A.
2. Turn on or reset the computer. Press Enter twice to respond
to the date and time prompts. The setup program loads
automatically and displays the Reference diskette’s operation
menu:
OPERATION MENU
1 - Setup
2 -
System diagnostics
0- Exit to DOS for more utilities
Enter selection number:
3.
Press 1 to
select
Setup
and then press Enter. The setup main
menu appears on the screen:
4.00 (c) 1988
Mass
2-2 Running the Setup Program