Sdp for always multicast, 2 get, Capability_media_streamprofiles_support = 1) – Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens User Manual
Page 444

VIVOTEK
444 - User's Manual
© 2022 VIVOTEK INC. All Right Reserved
314
“n” is the maximum stream profile number (capability_media_streamprofiles_num)
“streamprofile_i
0~(capability_media_streamprofiles_num)-1.
port is the rtsp port.
Please refer to the streamprofile group for requesting the stream profile token value for each
profile.
PARAMETER VALUE
DESCRIPTION
pimssm
1
1
: Enable the feature of Protocol
Independent Multicast - Source
Specific Multicast.
* This field is only required when
using PIM-SSM feature.
* Only valid when
network_rtsp_pimssm_enable=1.
Example:
Request the streaming of streamprofile_i0_token=Profile200,
rtsp://192.168.1.1:554/media2/stream.sdp?profile=Profile200
Note:
If the requested certain profile streamprofile_i
has not been created, the above method for requesting RTSP streaming will fail.
8.39.2 Get
SDP for always multicast
(capability_media_streamprofiles_support = 1)
Note:
This request requires Viewer access privileges.
Method:
GET/POST
Syntax:
http://<
servername
>:
“n” is the maximum stream profile number (capability_media_streamprofiles_num)
“streamprofile_i
0~(capability_media_streamprofiles_num)-1.
port is the http port.