13 get sdp of streams – Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens User Manual

Page 405

VIVOTEK

User's Manual - 405

274

Syntax:
http://<

servername

>/cgi-bin/operator/uartchannel.cgi?[channel=]

-------------------------------------------------------------------------
GET /cgi-bin/operator/uartchannel.cgi?[channel=]
x-sessioncookie: string[22]
accept: application/x-vvtk-tunnelled
pragma: no-cache
cache-control: no-cache

-------------------------------------------------------------------------
POST /cgi-bin/operator/uartchannel.cgi
x-sessioncookie: string[22]
content-type: application/x-vvtk-tunnelled
pragma : no-cache
cache-control : no-cache
content-length: 32767
expires: Sun, 9 Jam 1972 00:00:00 GMT

User must use GET and POST to establish two channels for downstream and upstream. The
x-sessioncookie in GET and POST should be the same to be recognized as a pair for one session. The
contents of upstream should be base64 encoded to be able to pass through a proxy server.

This channel will help to transfer the raw data of UART over the network.
Please see UART tunnel spec for detail information

PARAMETER

VALUE

DESCRIPTION

channel

0 ~ (n-1)

The channel number of UART.

8.12

Event/Control HTTP Tunnel Channel

(capability_evctrlchannel > 0)

Note:

This request requires

Administrator

privileges.

Method:

GET and POST

Syntax:
http://<

servername

>/cgi-bin/admin/ctrlevent.cgi

275

-------------------------------------------------------------------------
GET /cgi-bin/admin/ctrlevent.cgi
x-sessioncookie: string[22]
accept: application/x-vvtk-tunnelled
pragma: no-cache
cache-control: no-cache

-------------------------------------------------------------------------
POST /cgi-bin/admin/ ctrlevent.cgi
x-sessioncookie: string[22]
content-type: application/x-vvtk-tunnelled
pragma : no-cache
cache-control : no-cache
content-length: 32767
expires: Sun, 9 Jam 1972 00:00:00 GMT

User must use GET and POST to establish two channels for downstream and upstream. The
x-sessioncookie in GET and POST should be the same to be recognized as a pair for one session. The
contents of upstream should be base64 encoded to be able to pass through the proxy server.

This channel will help perform real-time event subscription and notification as well as camera
control more efficiently. The event and control formats are described in another document.

See Event/control tunnel spec for detail information

8.13

Get SDP of Streams

Note:

This request requires Viewer access privileges.

Method:

GET/POST

Syntax:
http://<

servername

>/_accessname>

n denotes the value of "capability_nvideoin", m denotes the value of "capability_nmediastream".
Example:
For m=2, the values are shown as
network_rtsp_s0_accessname = live1s1.sdp
network_rtsp_s1_accessname = live1s2.sdp