55 extension module io, 56 focussystem, Save day/night focus position – Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens User Manual
Page 391
VIVOTEK
User's Manual - 391
© 2022 VIVOTEK INC. All Right Reserved
260
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
name
string[40]
6/6
Identification of this entry.
ipaddress
6/6
The ipaddress of the receiving camera.
username
string[64]
6/6
The username of the receiving camera.
passwd
string[64]
7/6
The password of the receiving camera.
port
0~65535
6/6
The connection port to the receiving
camera.
do
time]
6/6
Indicate the source id and trigger time of
di trigger.
Ex. “0[10]” sets do0 with trigger time of
10 s for the receiving camera.
autotrack_enable
6/6
Enables autotracking for the receiving
camera.
autotrack_index
0,
6/6
PTZ preset index with smart tracking
advanced of the receiving camera.
* Only valid when the camera supports
“Smart Tracking Advanced” feature.
(Please refer to PTZ Control API for more
details)
* We support this parameter when the
version number (httpversion) is equal or
greater than 0317d.
gotopreset_enable
6/6
Enable the PTZ preset function of the
receiving camera.
gotopreset_type
mechanical, digital 6/6
PTZ type of the receiving camera.
gotopreset_index
0,
6/6
PTZ preset index of the receiving camera.
gotopreset_channel
0,
6/6
PTZ preset channel of the receiving
camera.
gotopreset_stream
0,
6/6
PTZ preset stream of the receiving
camera.
7.55
Extension Module IO
Group:
Extension
(capability_extension_di_num > 0 or capability_extension_do_num > 0)
© 2022 VIVOTEK INC. All Right Reserved
261
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
connected
6/7
Indication if extension module IO is
connected.
7.56
Focussystem
Group:
focussystem_c<0~(n-1)>
(capability_image_c<0~(n-1)>_remotefocus > 0)
n denotes the value of "capability_nvideoin"
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
autofocus_enablebyzoom
7/6
To allow the feature of auto focus when
zoom is operated.
* Only available when
capability_image_c<0~(n-1)>_focussyste
m_mode=AFbyzoom
7.55.1.
Save Day/Night Focus Position
Group:
focussystem_c<0~(n-1)>
(capability_image_c<0~(n-1)>_remotefocus > 0 and
capability_image_c<0~(n-1)>_focussystem_mode=focusshift)
n denotes the value of "capability_nvideoin"
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
focusshift_enable
6/6
To allow the remotefocus system to apply
a shifted day or night position indicated
in day_position or night_position.
focusshift_day_position
6/7
A customized IR offset value in lens
profile when ICR is switched to day
mode.
: default IR offset value is used.
focusshift_day_lastdate
6/7
A recorded UTC time when IR offset value
is saved during day mode.
: IR offset value hasn't been
saved before.
focusshift_night_position
6/7
A customized IR offset value in lens
profile when ICR is switched to night
mode.
: default IR offset value is used.