Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens User Manual
Page 285
VIVOTEK
User's Manual - 285
© 2022 VIVOTEK INC. All Right Reserved
154
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
One bit represents one channel.
Ex: “3” means channel 0 and channel1
support seamless recording .
* Only available when
"capability_supportsd" is 1 or
"capability_storage_dbenabled" is 1.
localstorage_modn
um
use this>
0,
0/7
The maximum MOD connection
numbers.
* Only available when
"capability_supportsd" is 1 or
"capability_storage_dbenabled" is 1.
* We replace this parameter with
“capability_storage_management_mo
dnum” when the version number
(httpversion) is equal or greater than
0312a.
localstorage_modv
ersion
0/7
Indicate MOD daemon version.
* Only available when
"capability_supportsd" is 1 or
"capability_storage_dbenabled" is 1.
localstorage_storm
grversion
0/7
Indicate storage manager daemon
version.
* Only available when
"capability_supportsd" is 1 or
"capability_storage_dbenabled" is 1.
localstorage_suppo
rtedge
0,
0/7
An 32-bit integer, which indicates the
supportive application of edge
storage.
If the value of this parameter is larger
than 0, it means that the camera
supports edge recording function.
bit 0 : It supports to record directly to
an on-board SD-Card.
bit 1~: Currently, they are reserved
bit, and the default value is 0.
* Only available when
© 2022 VIVOTEK INC. All Right Reserved
155
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
"capability_supportsd" is 1 or
"capability_storage_dbenabled" is 1.
localstorage_slcon
num
0,
0/7
The maximum seamless connection
number for each channel.
* Only available when
"capability_supportsd" is 1 or
"capability_storage_dbenabled" is 1.
localstorage_smart
sd
0/7
The "Lifetime and Log SD Card"
feature allows users to obtain the
card's remaining lifetime information.
0: Non-support this feature
1: Support this feature
* Only Sony, Micron SD card can
support this function now.
* Only available when
"capability_supportsd" is 1 or
"capability_storage_dbenabled" is 1.
remotecamctrl_ma
ster
0,
0/7
Indicate whether to support remote
auxiliary camera (master side), this
value means supporting max number
of auxiliary camera.
remotecamctrl_sla
ve
0/7
Indicate whether to support remote
camera control (slave side).
fisheyelocaldewarp
_c<0~(capability_n
videoin)-1>
0,
0/7
Indicate the supported streams of
local dewarp. One bit represents
one supported stream. The LSB
indicates stream 0.
Ex: “3” means stream 0 and stream 1
support local dewarp.
* Only available when
"capability_fisheye" > 0
shockalarm_suppo
rt
0/7
Indicate whether to support the shock
detection.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0306e.