Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens - Manual (Page 175)

VIVOTEK
User's Manual - 175
© 2022 VIVOTEK INC. All Right Reserved
44
NAME VALUE SECURITY
(get/set) DESCRIPTION
di_i<0~(k-1)> 1/7 0 => Inactive, normal
1 => Active, triggered
(capability_ndi > 0)
k is determined by the below
criterion:
The following applies for
capability_extension_di_num >= 0
* if extension_connected=1,
k=capability_ndi
* if extension_connected=0,
k=capability_ndi+
capability_extension_di_num
Otherwise,
* k=capability_ndi
do_i<0~(k-1)> 1/7 0 => Inactive, normal
1 => Active, triggered
(capability_ndo > 0)
k is determined by the below
criterion:
The following applies for
capability_extension_do_num >=
0
* if extension_connected=1,
k=capability_ndo
* if extension_connected=0,
k=capability_ndo+
capability_extension_do_num
Otherwise,
* k=capability_ndo
onlinenum_rtsp 0,integer> 6/7 Current number of RTSP
connections.
onlinenum_httppush 0,integer> 6/7 Current number of HTTP push server
connections.
onlinenum_sip 0, 6/7 Current number of SIP connections.
© 2022 VIVOTEK INC. All Right Reserved
45
NAME VALUE SECURITY
(get/set) DESCRIPTION
integer>
eth_i0 1/7 Get network information from
mii-tool.
vi_i<0~(capability_nvi-1)> 1/7 Virtual input
0 => Inactive
1 => Active
(capability_nvi > 0)
7.2.1 Status per Channel
Group: status_c<0~(n-1)> for n channel products
n denotes the value of "capability_nvideoin"
NAME VALUE SECURITY
(get/set) DESCRIPTION
signal_detect 1/7 Indicates whether the video source is
connected or not.
* Only available when
capability_videoin_type is 0 or 1.
signal_type ntsc,pal 1/7 The actual modulation type.
* Only available when
capability_videoin_type is 0 or 1.
daynight day, night 1/7 Indicate the current light status.
7.3 Digital Input Behavior Define
Group: di_i<0~(k-1)> for k is the value of "capability_ndi" (capability_ndi > 0)
k is determined by the below criterion:
The following applies for capability_extension_di_num >= 0
* if extension_connected=1, k=capability_ndi
* if extension_connected=0, k=capability_ndi+ capability_extension_di_num
Otherwise,
* k=capability_ndi
NAME VALUE SECURITY
(get/set) DESCRIPTION
normalstate high,
low 1/1 Indicates open circuit or closed circuit
(inactive status)